|
Network > Ethernet Settings
Ethernet Settings
- Go to Network > Ethernet.
- At the top of the page, you can see the model of Ethernet controller you are using now.
- You can choose to use DHCP to obtain an IP address or assign a static IP address to the SMP player.
- Enable Obtain the IP address from a DHCP server if the network supports DHCP protocol for obtaining the IP address automatically.
- If you want to assign a fixed IP address, enable Static IP address and enter all relevant information.
IP address |
You have to enter a valid IP address. |
Subnet mask |
You have to enter a valid subnet mask. |
Gateway |
You have to enter a valid gateway if you want to access Internet; otherwise, you can only use LAN. |
DNS-1, DNS-2 |
Please enter at least one DNS server address if you want to use the domain name (www.example.com), instead of numerical IP address to connect to Internet. |
- Enable Check network by pinging gateway if you want to adjust IP configurations automatically whenever the DHCP network changes. Enable this function and SMP player will send out a ping packet every 3 minutes to check the gateway. If the gateway doesn't response, SMP player will try to repair the network connection automatically.
|